Dual logic processor with chaining and CV functions
Two dual-input logic processors
15 different functions (+ inverted: AND > NAND)
Simultaneously available normal and inverted outputs
LEDs on all outputs
Chaining optionally inverted by dedicated button with LEDs
Chaining does not waste any input or output; an additional virtual
input is created in the second section
Functions with duration, voltage, percentage, and ratio are user
editable.
User settings are stored automatically
Random pass, voltage comparator, clock mult/div and delay line
functions allow CV control
White LEDs next to the pots confirm the matching of knob position and function
The outputs can be Ored by simple shorting in a multiple
Settings restored after power cycle
Firmware upgradeable by playing an audio file
Low consumption, skiff-friendly & compact module
Complements Klavis’ Logica XT with a varied feature set
Logic functions available
logic category
Functions
User setting
Section
Simple logic
And/Nand
None
Section 1 and 2
Or/Nor
Xor/Xnor
Advanced logic
Set/Reset
Section 1
-A&B
Alternate
Rise to pulse
Pulse length
Fall to pulse
Rise/fall to pulse
Gater (gate merger)
Gap length
Section 2
Vote
None
CV functions
Random
Max chance %
Voltage comparator
Threshold
Clock divider/multiplier
Ratio
Delay
Duration
Two dual-input sections can be used independently, put in parallel for 4-input wide logic, or
chained for more advanced processing.
Each section presents normal and inverted outputs.
The two sections offer a set of common and specific functions for a total 15 different ones; 30 when counting the inverted resuts (e.g. OR/NOR)
Several
functions offer real-time CV control for dynamic changes of the conditions.
All time-related
functions can be independently user adjusted and are saved automatically. LEDs tell permanently the actual status of all outputs.
